Wood sliding closet doors – Opting for a sliding closet door is to ensure a space saving in your room. Measure the distance between centers of the closet. Provide with rails and place them in the center distance, then using a pencil note the limits to cut the rail to length with a hacksaw. The length must be the same as that of the door. When sawing place a stationary object is inside the rail so it from twisting / not deform during the sawing operation. Once sawn rail, place it where it will be maintained and mark the location of the screw holes. Drill with a new forest (if possible) and insert the dowels and screws.
Wood sliding closet doors, slide rails perfectly above and below, see the measurements on the ground rail and drill and lower the PEG-ground rail using suitable plugs. Use the plumb line to check the verticality and correspondence measures. Climb one of the doors in positioning the top rail of the level while tilting to make it go through the rollers. If necessary, adjust the height of the wheels with a screwdriver.
11 Inspiration Gallery from Installing Wood Sliding Closet Doors
Wood sliding closet doors place the door in the bottom track and check a close insert the door well flush with the wall and the sliding is not blocked by anything. Test the door by making them slide several times and readjust the bearing height if necessary.
Tags: Solid Wood Sliding Closet Doors, Wood Sliding Closet Doors Ideas, Wood Sliding Closet Doors Plan